Flex FX7211 Manual Del Operador página 37

This table saw must be used only with the battery packs and chargers listed below:
2.5Ah 3.5Ah 5.0Ah
FX0111 FX0321 FX0121
Please refer to the battery pack and charger manuals for detailed operating
NOTICE
information.
BATTERY LEVEL INDICATOR (FIG. 19)
This table saw features battery level indicator
that displays the battery charge level.
Press the battery level indicator button and the
LEDs will light up for approximately 10 seconds
to communicate the battery pack charge level:
NOTE: To check the current battery charge
level, please turn off the table saw first and then
press the battery level indicator button.
NOTE: If the battery level indicator button is
pressed while the table saw is connected to
the power adapter, all four LEDs of the power
indicators will light up.
Battery Pack Charge Level
100% - 75%
75% - 50%
50%-25%
25% - 10%
< 10%
DUST EXTRACTION (FIG. 20)
Dust Port
The dust port on this table saw is compatible
with any vacuum or vacuum accessory with a
2-1/4 inch outside diameter. For vacuums with
a different outside diameter, an adapter (not
included) must be used.
Battery Pack
6Ah 8.0Ah
FX0331 FX0221
Power Indicator
10Ah 12Ah
FX0341 FX0231 FLEX
FX0411
Fig. 19
Battery Level
Indicator Button
Fig. 20
-37-
Charger
FLEX FLEX
FX0421 FX0431
Battery Level
Indicators
Light Pattern
Solid for 10s
Solid for 10s
Solid for 10s
Solid for 10s
Flashing for 10s
Dust Port
FLEX
FX0451