Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
product damage due to a short circuit, never
immerse your charger or battery pack in fluid
or allow a fluid to flow inside them. Corrosive
or conductive fluids, such as seawater, certain
industrial chemicals, and bleach or bleach-
containing products, etc. can cause a short
circuit.
WARNING
this product until the parts are replaced. Use
of this product with damaged or missing parts
could result in serious personal injury.
WARNING
serious personal injury, always remove the
battery pack from the tool when assembling
or adjusting parts.
POWER SWITCH (FIG. 18a – 18b)
This table saw has a safety
NOTICE
feature that helps prevent
accidental starting. When power is cut to the
saw, the tool will switch to the off mode. Once
power is restored, the tool will need to be turned
on again.
To turn saw on, lift the power switch by pulling
it up (Fig. 18a).
To turn the saw off, push the power switch
down to its original position.
To prevent unauthorized use, the power switch
can accommodate a padlock (not provided with
the table saw) with a 1/4" (6.3 mm) diameter
shackle (Fig. 18b).
OPERATING INSTRUCTIONS
To reduce the risk of fire,
personal injury, and
If any parts are damaged
or missing, do not operate
To prevent accidental
starting that could cause
WARNING
does not fit all operators in the same way. Make
sure the eye protection chosen has side shields
or provides protection from flying debris both
from the front and sides.
WARNING
and gloves when handling saw blades.
WARNING
metals, such as aluminum or copper, even
with a special blade designed to cut these
materials.
WARNING
any masonry material, even with abrasive
cutoff wheels.
Fig. 18a
Power Switch
Fig. 18b
-36-
Always wear eye
protection. Eye protection
Always wear hearing
protection during cutting
This table saw is not
recommended for cutting
This table saw is not
recommended for cutting
Publicidad
