Publicidad
Idiomas disponibles
Idiomas disponibles
USING THE FLIP-OVER FENCE
When the rip fence is beyond the table-top,
ensure that the flip-over fence is secured in the
lowest position in both the front and the back
slots. When the rip fence is over the table,
ensure that the flip-over fence is in the upper
position on both the front and back slots
(Fig. 26a&26b).
If an auxiliary fence is required, place the flip-
over fence in the stored position on both the
front and back slots.
USING THE RIP FENCE POINTER (FIG. 27)
The rip fence pointer shows the distance from
the blade to rip fence.
Right position 1
The top scale indicates the position of the rip
fence relative to the right side of the blade for
the inner position. In this position, the rip fence
can be used to make cuts from 0 to 20.5 inches.
Right position 2
The bottom scale indicates the position of the
rip fence relative to the right side of the blade for
the outer position. In this position, the rip fence
can be used to make cuts from 4 to 25 inches.
Left position
The scale has no relevance for this position. The
maximum capacity on the left side of the blade
is 12 inches.
Fig. 26a
Fig. 26b
Fig. 27
Right Position 1
Left Position
-41-
Right
Position 2
Publicidad
