Harbor Breeze AR15-72BN Manual De Instrucciones página 12

FINAL INSTALLATION
Make sure connections are neatly tucked into
1.
the ceiling outlet box.
Slide the canopy (B) up to the mounting
bracket (A) and place the key holes on the
canopy (B) over the loose canopy mounting
screws on the mounting bracket (A). Turn the
canopy (B) clockwise until it locks in place at
the narrow section of the key holes. Make
sure the positioning pin on the mounting
bracket falls into one of two holes on the
canopy (B), and then tighten the two canopy
mounting screws.
2. Attach the canopy bottom cover (C) to the
canopy (B) by inserting the screw heads into
the key slots in the canopy bottom cover (C)
and rotating it clockwise.
NOTE: Adjust the canopy mounting screws
as necessary until the canopy (B) and canopy
bottom cover (C) are snug.
Attach the blade (G) to the blade arm using
3.
the blade screw and the medallion (H). Make
sure the blade (G) is straight. Repeat these
steps for the remaining blades.
1
Positioning
Pin
2
Canopy
Mounting
Screw
3
12
Canopy Mounting
Screw
Blade Arm
Screw