Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY
SAFETY
INSTRUCTIONS
INSTRUCTIONS
Do not operate
Proper maintenance
a damaged lift.
and inspection
is necessary
for safe operation.
c
SAFETY
CAUTION
INSTRUCTIONS
Read operating
Authorized personnel
and safety manuals
only in lift area.
before using lift.
c
WARNING
CAUTION
Position vehicle
Use vehicle
with center of gravity
manufacturer's
midway between
lift points.
adapters.
c
WARNING
Do not override
self-closing
lift controls.
c
WARNING
WARNING
Position vehicle
Remain clear of lift
with center of gravity
when raising or
midway between
lowering vehicle.
adapters.
c
WARNING
WARNING
Clear area if vehicle
Avoid excessive
is in danger of falling.
rocking of vehicle
while on lift.
c
16
SAFETY INSTRUCTION
• Daily inspect your lift. Never operate if it malfunctions or if it
has broken or damaged parts. Use only qualified lift service
CAUTION
personnel and genuine parts to make repairs.
• Thoroughly train all employees in use and care of lift, using
? ?
manufacturer's instructions and "Lifting It Right" and "Safety
?
Tips" supplied with the lift.
• Never allow unauthorized or untrained persons to position
Lift to be used
vehicle
by trained operator
only.
• Prohibit unauthorized persons from being in shop area
c
c
while lift is in use.
• Do Not permit anyone on lift or inside vehicle when it is
either being raised or lowered.
• Always keep area around lift free of tools, debris, grease
and oil.
• Never overload lift. Capacity of lift is shown on nameplate
affixed to the lift.
• Do Not stand in front of the vehicle while it is being
c
positioned in lift bay.
• Do Not hit or run over lift arms or adapters. This could
damage lift or vehicle. Before driving vehicle into lift
bay, position arms and adapters to provide unobstructed
entrance onto lift.
• Load vehicle on lift carefully. Position lift adapters to contact
at the vehicle manufacturer's recommended lift points.
Raise lift until adapters contact vehicle. Check adapters
for secure contact with vehicle. Raise lift to desired working
c
height.
WARNING: DO NOT go under vehicle if locking latches
•
•
•
CAUTION
•
•
•
•
Always use
safety stands when
•
removing or installing
heavy components.
c
c
•
CAUTION
Auxiliary adapters
may reduce
load capacity.
c
c
0496-M004-0
are not engaged.
Do Not block open or override self-closing lift controls;
they are designed to return to the "Off" or Neutral
position when released.
Do Not remove or disable arm restraints.
Remain clear of lift when raising or lowering vehicle.
Always use safety stands when removing or installing
heavy components.
Avoid excessive rocking of vehicle while on lift.
Clear area if vehicle is in danger of falling.
Remove tool trays, stands, etc. before lowering lift.
Release locking latches before attempting to lower
lift.
Position lift arms and adapters to provide an
unobstructed exit before removing vehicle from lift
area.
Publicidad
