Ravaglioli KPH-40ECGA Manual De Uso Y Mantenimiento página 19

This style adapter is only for lifting Unibody Vehicles.
This style adapter must be for lifting Frame, Stub Frames, and Perimeter Frame Vehicles.
WARNING: Most specialty or modifed vehicles cannot be raised on a frame engaging lift. Contact
vehicle manufacturer for raising or jacking details.
LIFT
POINTS
Pickup Truch Pickup Truck
LIFT
POINTS
Perimeter Frame
Perimeter Frame
Fig . 2
Turn on the main power switch to connect power.
Then press the raise switch. The lift will rise.
When we loosen the raise switch, the lift will
stop. Pull down
the lowering vable handle, the lift will go down
a short distance. Then the lock system will start
work.
The lift will stop and be locked. When the lift is
locked, the lock light will be on. Press the raise
switch and let the lift raise a short distance. Then
pull down the latch release and lowering vable
handle at the same time. The lift will be down.
Adapter Recommendations
Fig . 1
Typical Lifting Points
LIFT
POINTS
Unitized Body
Unitized Body
LIFT
POINTS
Stub Frame
Stub Frame
0496-M004-0
NOTE: Some vehicles may have the
manufacturer's Service Garage Lift Point
locations identifed by triangle shape marks
on it's undercarriage.
Also, there may be a label located on the
right front door lock face showing specifc
vehicle lift points. If the specifc vehicle lift
points are not identifed, refer to the "Typical
Lift Points" illustrated herein. ALWAYS
follow the operating instructions supplied
with the lift.
Latch
Latch
Release
Release
Main power
Main Power
Switch
Switch
Raise Switch
Raise
Switch
Lowering
Lowering Vable
Vadle Handle
Handle
Fig . 3
19