Aqua-Base ARUBA Comfort 60I Manual De Utilización página 6

AQUA-BASE
ARUBA Comfort
Technical manual
Main R/O subset (continues)
SALINITY PROBE
CE62
PRODUCTION VALVE
V64
CV65 REJECT CHECKVALVE
Re-hardening (neutralite) filter subset (OPTION)
V84.1
BYPASS VALVES
V84.2
NEUTRALITE FILTER
N85
Post treatment subset(OPTION)
INJECTION UNIT
IV81
DOSINGPUMP
DP81
DOSING TANK
TK81
Cleaning valve
V50 3 WAY CLEANING VALVE
1.3.2 Hydraulic connections
Seawater inlet subset
SEA WATER INLET
SWI
CLEANING SOLUTION INLET
CSI
RWO RAW WATER OUTLET
Flushing subset (OPTION)
AUTOFLUSH INLET
AFI
AUTOFLUSH OUTLET
AFO
FRESHWATER INLET
FWI
Feeding subset
RWI RAW WATER INLET
PWO PRESSURISED WATER OUTLET
Sand filter subset (OPTION)
SANDFILTER INLET
SFI
SANDFILTER REJECT
SFR
SANDFILTER OUTLET
SFO
Prefiltration subset
FILTRATION SUBSET INLET
FSI
FILTRATION SUBSET OUTLET
FSO
Main R/O subset
PRESSURISED WATER INLET
PWI
SWO SEA WATER OUTLET
FRESHWATER OUTLET
FWO
Neutralite subset (OPTION)
NEUTRALITE FILTER INLET
NFI
NEUTRALITE FILTER OUTLET
NFO
Note: Additional connections are to be made in the
the production-valve subset and the control panel, as they come as separate componants (see Annexe A3-02).
•
Mesures produced fresh-water salinity level and
drives/commandes the production valve (V64)
Piloted by the PLC (and the salinity probe CE62), it directs the
produced fresh water to the reject or to the freshwater tank
when the measured salinity is correct.
Prevents the concentrate (brine) from going in direction of the
production line.
Enables bypassing (completely or partly) of the neutralite filter.
Mineralizes the produced water with magnesium and calcium
intended for consuption.
Ensures the injection of chlorine into the produced water.
(Add a tee on the production line for the use of the dosing
pump injection unit.)
Enables precise dosing of a post treatment (chlorine) product.
Contains chlorine solution (post treatment).
Enables to run the system in closed loop. This is necessary
when an acid- or alkaline-solution-cycle is needed to clean the
membranes.
From the hull valve (not included).
For feed from the auxilary water container.
From pressurized (2-3bar) onboard fresh water circuit.
To a dedicated reject circuit.
To reverse osmosis unit.
Brine/Concentrate.
From the reverse osmosis unit.
To the freshwater storage tank.
"MODULAR
" version between the HP pump, the membrane pack,
REV.J
P6/108