AQUA-BASE
ARUBA Comfort
Technical manual
1.4.3
Electrical connections
The connections of the unit should be made between the electric power box the feed pump and the
control box on the R/O-unit itself (and if installed, the optional flushing subset, sandfilter valve and the
remote controls). The power box should be fed according to the specific models' requirements.
The AQUA-BASE unit is equipped with a circuit breaker ensuring its protection and security. This
doesn't ensure the protection of your installation, which should be equipped with devices conforming to
the current legislation.
No other equipment should be fed from the
Check beforehand that the unit voltage corresponds with the network.
Control box (left side)
See the electric connections in chapter §5 "ANNEXES", page A3-xx "On-board installation and pages
A7-xx Electric -diagrams and -connections.
•
AQUA-BASE
units' electric box.
Powerbox
Control box (right side)
REV.J
P9/108