Publicidad
Idiomas disponibles
Idiomas disponibles
EN
be selected as the mains power cable, taking into account the type of connection and rated
power of the cooker.
The connection cable must be fixed in the relief device (cable clamp).
Mains power socket (schematic illustration)
The mains power socket is located on the top of the appliance for the built-in oven.
Open and close mains power socket:
- To unlock, insert a screwdriver (1) and move it slightly downwards (2).
- To close, fold the cover and snap in with light pressure.
IMPORTANT
Please note that the protective earth must be connected to the terminal of the terminal
•
strip marked with
The electrical installation of the oven should be fitted with an emergency switch that
•
disconnects the entire appliance from the mains in an emergency.
The clearance between the working contacts of the emergency switch must be at least 3
•
mm.
Before connecting the appliance to the mains power supply, read the information on the
•
type plate and circuit diagram.
Page | 40
IMPORTANT
The electrical connection to all cookers and built-in appliances
may only be carried out by a licensed electrician in accordance
with the regulations of the local energy supply company.
Before connecting the appliance, the electrician must check
whether the mains voltage present corresponds to the rated
voltage of the appliance.
Notes for the electrician
The appliance is designed to be connected to 1-phase
alternating current (220-240 V/50 Hz).
The wiring diagram shown below can also be seen on the
connection socket. An appropriately designed cable type must
.
Publicidad
