SKF FlowMaster II Manual De Instrucciones página 4

EMAIL: robert.collins@skf.com WEBSITE:
This U.K. Declaration of Incorporation is
issued under sole responsibility of the
manufacturer. Lincoln Industrial Corporation
hereby declares that the partly completed
machinery stated below:
Name: FlowMaster II (12V)
Model number(s): 85752
Description:
Rotary-driven electric pump (series "A")
Year of CE: 2023
in its intended use, is in conformity with the
relevant union harmonization legislation:
Supply of Machinery (Safety) Regulations
2008 (2008 No. 1597)
along with the following Directive(s) that
were also applied with the above legislation:
EN ISO 4413: 2010
Hydraulic fluid power - general rules and
safety requirements for systems and their
components
I, the undersigned of Lincoln Industrial Corporation, hereby declare that the equipment specified above, in its intended use, conforms with the
Essential Health and Safety Requirements of U.K. legislation Supply of Machinery (Safety) Regulations 2008 No. 1597 Annex I, Declaration of
Incorporation by the time of placing it on the market.
___________________________________
Robert Collins
Technical Compliance Manager
St. Louis, MO, U.S.A.
2023/10/03
U.K. Declaration of Incorporation *
Manufacturer name/address:
Lincoln Industrial Corporation
5148 N. Hanley Road
St. Louis, MO 63134 U.S.A.
TEL: +1 (314) 679-4200 FAX: +1 (314) 679-4367
Authorized to compile the technical file:
SKF (U.K.) Limited
2 Canada Close
Banbury, Oxfordshire, OX16 2RT, GBR
EN ISO 12100: 2010
Safety of machinery. General principles
for design. Risk assessment and risk
reduction.
DIN EN ISO 809:2012
Pumps and pump units for liquids -
Common safety requirements
EN 12162:2009
Liquid pumps - safety requirements -
procedure for hydrostatic testing
EN 349:1993
Safety of machinery – Minimum gaps to
avoid crushing parts of the body
EN ISO 13732-1:2008
Ergonomics of the thermal environment.
Methods for the assessment of human
responses to contact with surfaces - hot
surfaces.
EN 60204-1:2018
Safety of machinery – Electrical
equipment of machines - general
requirements.
www.skf.com
The following EHSR (Essential Health and
Safety Requirements) have been applied:
1.1.2a – 1.1.2b – 1.1.2c – 1.1.3 – 1.1.5 –
1.2.2 - 1.2.5 – 1.3.2 – 1.3.3 – 1.3.5 – 1.3.7
– 1.3.8 – 1.5.1 – 1.5.6 – 1.7.1 – 1.7.1.1 –
1.7.1.2 – 1.7.3 – 1.7.4
The manufacturer maintains a technical file
summary sheet containing test reports and
product documentation:
Technical file summary sheet number:
RA404484
* Indicates change.
4
DOCUMENT NUMBER
UK404441CA