Publicidad
Idiomas disponibles
Idiomas disponibles
Guarantee conditions
Carrera products are technically advanced products (NO TOYS) which should be handled with care.
It is important to follow the directions given in the operating instructions. All components have been
subjected to careful inspection (technical modifications and alterations to the model for the purpose
of product improvement are reserved).
Should any faults nevertheless occur, guarantee is assumed within the scope of the following conditions:
In accordance with the following provisions, Carrera Toys GmbH (hereinafter referred to as "manufacturer")
warrants to the endconsumer (hereinafter referred to as "customer") that the Carrera RC-model-helicopter
(hereinafter referred to as "product") delivered to the customer shall be free from defects in material or work-
manship for two years from the date of purchase (guarantee period). Such defects will, at the manufacturer´s
option, either be repaired by the manufacturer or fixed by delivering new or refurbished parts free of charge.
The warranty does not cover failure due to normal wear and tear, (e.g. to batteries, rotor blades, cabin cover-
ing, gear wheels etc.), or damage as a result of improper handling/misuse or unauthorised interference. Any
other customer´s claims asserted against the manufacturer, especially action for damages, shall be excluded.
The contractual and statutory rights of the customer against the seller (supplementary performance, rescis-
sion of the contract, abatement, compensation) which exist with the product not having been free from defects
at the time of the passing of risk, shall remain unaffected by this warranty.
Claims from this special warranty shall only be valid if:
• the defect reported has not arisen by damage caused by unintended use or misuse as specified in the
instruction manual,
• the failure of the product is not due to normal wear and tear
• the product does not show any signs resulting from repairs or other interferences carried out by workshops
not having been authorised by the manufacturer,
• the product has only been operated with accessories authorised by the manufacturer and
• the product is sent in together with the original proof of purchase (invoice / receipt) and the completely filled
in warranty card which has not been altered in any way.
Guarantee cards cannot be replaced.
Note for EU countries: Reference is hereby made to the seller's statutory guarantee obligation, to the extent
that this guarantee obligation is not restricted by the product guarantee.
Notes for AUSTRALIA: Our goods come with guarantees that cannot be excluded under the ACL. You are
entitled to a replacement or refund for a major failure and for compensation for any other reasonably foresee-
able loss or damage. You are also entitled to have the goods repaired or replaced if goods fail to be of accept-
able quality and the failure does not amount to a major failure.
Declaration of conformity
Carrera Toys GmbH hereby declares that this model including the controller conforms with the fundamental
requirements of the following EC directives: EC Directives 2001/95/EC and the other relevant regulations of
Directive 2014/53/EU (RED). The original declaration of conformity can be requested from carrera-rc.com.
Maximum radio-frequency power transmitted <10 dBm · Frequency range: 2400 – 2483.5 MHz
Warning!
This remote-controlled model is NOT A PLAYTHING and is only suitable for young people over 14 years of age.
This product is not intended for use by children without supervision of a parent. Flying the helicopter requires
skill and children must be trained under the direct supervision of an adult. Before first use: Read the user's
information together with your child. Keep the instructions for use for later reference. Note for adult
supervisors: Check if the toy is assembled as instructed. The assembly shall be performed under the
supervision of an adult. Inappropriate use may result in severe injuries and/or damage to property. It has to
be operated with care and caution and requires both mechanical and mental skills. The operating instructions
contain notes on safety and technical regulations as well as information on maintaining and operating the
product. It is indispensable to read these instructions thoroughly before the first usage. Only this helps to
avoid accidents with injuries and damage. Hands, hair and loose clothing, including other objects such as
pens and screwdrivers must be kept away from the propeller (rotor). Do not touch the rotating rotor. Especially
take care that your hands DO NOT get close to the rotor blades!
CAUTION: For use only outdoors – not to be used indoors. Risk of eye injuries. Do not fly near your
face to avoid injuries. Start and fly only when the area is appropriate for the intended use (free area,
no obstacles) and only within direct visual contact. Only operate under good visibility and calm
weather conditions. As user of this product you are solely responsible for handling it safely in order
to ensure that neither you nor other persons or their property suffer damages or are endangered.
• Never use your model with weak remote control batteries.
• Avoid busy areas. Always make sure that there is enough space.
• Do not use your model on an open street or in public areas in order not to endanger or hurt anyone.
• CAUTION: Do not start up and fly when persons, a nimals or any obstructions are within the flying
range of the helicopter.
• Start and fly is strictly forbidden near high voltage poles, railway tracks, roads, swimming pools or open water.
• Only operate under good visibility and calm weather conditions.
• Exactly observe the instructions and warnings for this product and for any possible additional equipment
(battery charger, rechargeable batteries etc.) being used by you.
• Should the helicopter come into contact with any living thing or solid object, immediately return the
gas control to zero, in other words the left-hand joystick must be at the stop at the bottom of the slide!
• Avoid any moisture as this might do damage to the electronics.
• There is a risk to suffer severe injury or even death if you put parts of your model into your mouth or lick them.
• Do not change or modify anything on the helicopter.
If you do not agree to these terms please immediately return the complete helicopter model in new and
unused condition to the retailer.
Important information concerning Lithium Polymer rechargeable batteries
Lithium-Polymer (LiPo) rechargeable batteries are significantly more sensitive than traditional alkali- or
NiMH-rechargeable batteries which are normally used with radio control units. Therefore the instructions
and warnings have to be observed in detail. In case of improper use of LiPo rechargeable batteries there is
a danger of fire. Always follow the manufacturers´ instructions if you dispose of LiPo rechargeable batteries.
Regulations on disposal for waste electrical and electronic equipment (WEEE)
This symbol, showing refuse bins with a cross through them, denotes that empty
batteries, rechargeable batteries, button cells, recharge able battery packs, equipment
batteries, disused electrical equipment, etc. should not be disposed of in domestic
refuse, as they are harmful to the environment and health. Please help to preserve
environment and health and talk to your children about the correct disposal of used
batteries and disused electrical equipment. Batteries and disused electrical equip-
ment should be handed in to the usual collection points where they can be properly recycled. Do not mix dissim-
ilar battery types or employ new and used batteries together. Empty batteries should be removed from the
product. Do not recharge non-recharge able batteries due to risk of explosion. Batteries are to be inserted with
the correct polarity.
WARNING!
Rechargeable batteries are only to be charged by adults. Exhausted batteries are to be removed from
ENGLISH
the toy. Rechargeable batteries should be removed from the product before charging. Supply terminal are not to
be short-circuited. Only use the batteries recommended or equivalent types.
recharging the battery, only use the detachable supply unit provided with this toy.
with the toy are to be regularly examined for damage to the cord, plug, enclosure and other parts, and in the event
of such damage, they must not be used until the damage has been repaired. The toy is only to be connected to
Class II equipment bearing the following symbol.
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the us-
er's authority to operate the equipment.
NOTE: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If the product does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures :
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IC statement
The device contain license-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Eco-
nomic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
1. The device must not cause interference;
2. The device must accept any interference, including interference that may cause undesired operation of the device.
Guidelines and warnings for the use of LiPo rechargeable batteries
• You have to charge the attached 7.4 V
at a safe distance to flammable material.
• Never leave the battery unattended while it is charging
• After a flight, the rechargeable battery has to cool down to the ambient air temperature before charging it.
• You must always use the corresponding LiPo charging unit (USB cable / remote control). In case of
non-compliance with these directions there is a danger of fire resulting in a health risk and/or damage to
property. NEVER use any other battery charger.
• Should the rechargeable battery swell or deform while discharging or recharging, you have to immediately
stop charging or discharging the battery. Take the battery out as quickly and carefully as possible and place
it in a safe and open area offside any inflammable material and watch it for at least 15 minutes. In case you
continue charging or discharging a battery which has already started to swell or deform there is a danger of
0
fire! Even in case of slight deforming or ballooning the rechargeable battery has to be taken out of operation.
• Store the rechargeable battery at ambient temperature in a dry place.
• Always recharge the battery after use to prevent its becoming deep discharged. After use, the bat-
tery must be allowed to cool down for at least 20 minutes before it can be fully recharged. Recharge
UAS class
the battery occasionally (suggested every 2–3 months). Supply terminals are not to be short-circuit-
ed. Failure to treat the battery as described above can lead to its becoming defective. Never leave
the battery unattended while it is being charged.
• When transporting or temporarily storing the rechargeable battery the temperature should be between
5-50°C. If possible, do not store the battery or the model in a car and do not expose it to direct sunlight. In
case the battery is broiled it can be damaged or catch fire.
Note: If the battery voltage/output is low you will recognise that a considerable trim and/or controlling is
necessary to avoid that the helicopter starts trundling. This usually occurs before reaching a battery voltage
of 3 V and it is a good moment to end the flight.
Contents of package
1x Helicopter
1
1x Controller
1x USB charging cable
1 x LiPo rechargeable battery
1 x Set of batteries (non-rechargeable)
1 x set of replacement rotor blades
1 x spare parts
Recharging the LiPo rechargeable battery
Rechargeable batteries are to be removed from the toy before being charged Make sure you only charge the
LiPo rechargeable battery supplied with the LiPo charging unit also supplied (USB cable and remote control).
In case you try to charge the rechargeable battery with a different LiPo battery charger or any other battery
charger, this might cause serious damages. Please carefully read the previous chapter about warnings and
guidelines on the usage of rechargeable batteries before proceeding.
Charging via computer:
2
• Rechargeable batteries are to be removed from the model before being charged.
• Connect the USB charging cable with the USB port of a computer. The LED on the USB charging cable
flashes rhythmically, indicating that the charging unit is properly connected to the computer. When you plug
in an empty battery, the LED on the USB charging cable lights up continuously, indicating that the battery is
being charged. The USB charger cable is so designed that reversed polarity is not possible.
• It takes about 90 minutes to recharge a discharged battery (but NOT a deep-discharged one). As soon as
the battery is fully charged, the LED on the USB charging cable is no longer lighting up.
Note: When supplied, the lipo-battery is already partially charged so the first charging cycle may well take less time.
It is essential to follow the connection sequence given above!
Undo the plugged connection on the helicopter if you are not going to use the helicopter. Failure to
observe this precaution may cause battery damage!
Inserting the batteries in the remote control
Open the battery compartment. Insert batteries. Please keep in mind the correct polarity. After having
3
closed the compartment you can check all functions of the remote control with the help of the pow-
er-switch on the front. With the power-switch turned ON and proper functioning, the top center LED on the
remote control will light up red. When the control LED flashes rapidly, the batteries in the controller must be
changed.
Frequency bind between model and remote control
The Carrera RC helicopter and the remote control are frequency bound at purchase. Should there occur
4
any problems with the communication between the Carrera RC helicopter and the remote control at the
beginning, please carry out a new frequency bind.
• Connect the battery in the model.
• The LED in the helicopter now flashes in rhythmically-accelerating sequence.
• Switch on the controller at the power switch. While connecting, the controller emits a signal tone.
4
WARNING: For the purposes of
Battery chargers used
or
700 mAh/ 5.18 Wh LiPo rechargeable battery in a safe place and
Publicidad
