KitchenAid ARTISAN 5KCG100 Manual De Instrucciones página 40

Troubleshooting Problems
If the grinder does not run when
switched on:
Check to see if the burr grinder is
plugged into a grounded outlet. If it
is, unplug the grinder, then plug it
back in again. If the burr grinder still
does not work, check the fuse or
circuit breaker on the electrical circuit
the grinder is connected to and make
sure the circuit is closed. If the grinder
does not run after taking these steps,
a foreign object may be jamming the
cutting burrs. See "Cleaning the
Cutting Burrs" on page 14 for more
information.
If the grinder runs when
switched on, but coffee does
not grind:
The cutting burrs require cleaning or
are worn. See "Cleaning the Cutting
Burrs" on page 14 or "Replacing the
Cutting Burrs" on page 17 for more
information.
If the grinder is operating
normally, but stops abruptly:
Immediately turn off the burr
grinder. A foreign object, such as a
pebble or twig, may have jammed
the cutting burrs. See "Cleaning the
Cutting Burrs" on page 14 for more
information.
If the grind is too coarse, or the
grinder isn't producing an
acceptable range of grinds:
See "Adjusting the Cutting Burrs" on
page 11 or "Replacing the Cutting
Burrs" on page 17 for more
information.
If the problem cannot be fixed
with the steps above, see the
®
KitchenAid Burr Grinder Warranty
on page 19.*
* Do not return the Burr Grinder to the retailer
– they do not provide service.
18