Hayward PROChem Double pH/ORP Manual Del Propietário página 12

EN
Connection
Clamp
description
1 ORP Input
2 pH Input
3 Input Probe
Input Free
4
Chlorine sensor
Frequency input
5 by water meter
pulse sender
Level
6
(product tank)
Level
7
(product tank)
Flow Check
8
input
9 Serial Port
10 Trigger Input
11 Output Relay
12 Output Relay
13 Output Relay
14 Earth connector
15 Power Supply
ProChem Double
ORP Yellow BNC Probe
pH Blue BNC Probe
TEMPERATURE SENSOR
(PT100)
A= two wires sensor, probe
included in the package
B= three wires sensor, please
check the optional colors
probe
Input free chlorine probe*
PRO-CHEM-DPHCL
A = amperometric (μA signal probe)
Pt: Platinum sensor (-)
Cu: Cupper sensor (+)
PRO-CHEM-DPHCL2
B = potentiostatic (4-20mA probe)
* Pay attention to the polarity
Flow Rate (Freq. Input)
A= Mechanical reed
B= Padwheel hall sensor
pH Level probe
Chlorine (ORP) level probe
Flow Check by
REED sensor
None
Circulation Pump (220Vac input)
RL1 AUX1 pH
RL2 AUX2 OPR/Chlorine
RL3 Alarm
Earth
220-240 Vac 50-60 Hz (F/N)
ProChem Double | pH · ORP · Chlorine
Only use spare parts supplied by Hayward brands ®
Wire connection details
ORP Probe
pH Probe
Level probe for chemical tank
Level probe for chemical tank
Please read paragraph 4c
Dry contact
Dry contact
Dry contact
---
---
Page 11 on 42
Status
Mandatory to connect
Mandatory to connect
Mandatory to connect
Mandatory to connect
Optional for pH / ORP
Mandatory for pH /
ORP / FCl
Optional
Optional
Mandatory to connect
None
Mandatory to connect
Optional
Optional
Optional
Mandatory to connect
Mandatory to connect