Hayward PROChem Double pH/ORP Manual Del Propietário página 20

EN
E. Chlorine Probe Calibration menu
The Chlorine Probe Calibration menu consists of three (3) sub-menus:
• Automatic 1 Point: the instrument requires a single point calibration by
external referenc.
• Automatic 2 Points: the instrument requires a double point calibration by
external referenc.
• Reset (Calibration): the calibrations can be deleted and restored the
default values.
Scroll through the menu using
6c4. Setup menu
In View measure mode, press
to select the item Setup and press
The Setup menu consists of fi ve (5) sub-menus for Hayward Basic* A pump
(pH+ORP) and six (6) sub-menus for Hayward Plus* B pump (pH+ORP+CL):
A. pH Pump
B. ORP (* A : Pump, * B : Measure)
C. CL Pump (* B : Pump)
D. AUX1 Relay
E. AUX2 Relay
F. AUX3 Relay
Below are illustrated the settings required for each sub-menu indicated above.
Use to select an item and press
To exit the menu, press
confi rm with .
For not saving, select NO using
, select the item and confirm with
for 3 seconds to access the main menu, use
Setup* A
■ pH Pump
□ ORP Pump
□ Aux1 Relay
□ Aux2 Relay
□ Aux3 Relay
to confi rm.
; the instrument will display the question "Save?";
and confirm with
ProChem Double | pH · ORP · Chlorine
Only use spare parts supplied by Hayward brands ®
to confi rm.
Setup* B
■ pH Pump
□ ORP Measure
□ CL Pump
□ Aux1 Relay
□ Aux2 Relay
□ Aux3 Relay
.
Page 19 on 42
CL Probe
■ 1 point
□ 2 points
□ Cal. Reset
.
Main Menu
□ Calibration
■ Setup
□ Advanced
□ Alarm list
□ Info/Priming
Save?
NO
YES