Hayward PROChem Double pH/ORP Manual Del Propietário página 19

EN
B. ORP Probe Calibration menu
The ORP Probe Calibration menu consists of three (3) sub-menus:
• Automatic: the instrument requires the standard buffer solutions 465mV.
• Reference: the instrument accepts the calibration of one point with a
manually set value.
• Reset (Calibration): the calibrations can be deleted and restored the
default values.
Scroll through the menu using
C. Temperature Probe Calibration menu
The Temperature Probe Calibration menu consists of two (2) sub-menus:
• Single (1) Point: the instrument requires a single point calibration by
external reference.
• Reset (Calibration): the calibrations can be deleted and restored the
default values.
Scroll through the menu using
D. Flow Rate Sensor Calibration menu
The Flow Rate Sensor Calibration menu consists of two (2) sub-menus:
• Flow rate: the instrument requires a single point calibration by external
reference.
• Reset sensor: delete all calibrations performed previously.
Scroll through the menu using
Note: The flow calibration is always recommended even if the settings used on
Advanced menu are correct, according to the installed sensor model.
, select the item and confirm with
, select the item and confirm with
, select the item and confirm with
ProChem Double | pH · ORP · Chlorine
Only use spare parts supplied by Hayward brands ®
ORP Probe
■ 1 point
□ Reference
□ Cal. Reset
.
Temp. Probe
■ 1 point
□ Cal. Reset
.
Flow Rate Sensor
■ Flow rate
□ Reset sensor
.
Page 18 on 42