Profi Cook PC-ES 1265 Manual De Instrucciones página 20

CAUTION:
• Do not use a wire brush or other abrasive objects.
• Do not use harsh or abrasive cleaning agents.
Clean the outside of the appliance with a slightly damp cloth
if necessary – without any additives.
Brew Head and Rubber Seal
Wipe the brew head and the rubber seal with a damp cloth.
Dampen a soft nylon brush beforehand to remove stubborn
dirt. Dry off with a dry cloth.
Accessories
You can clean the filter holder, filter inserts, drip grid, col-
lection container, measuring spoon, water tank and steam
nozzle in warm rinsing water with a little hand dishwashing
liquid. If necessary, you can use a fine, soft nylon brush.
Rinse with clean water. Dry the parts with a soft cloth.
CAUTION:
These parts are not suitable for cleaning in the dish-
washer. Exposure to heat and harsh cleaners could
cause them to warp or discolour.
Water Tank
1. Remove the water tank by pulling it out by the handle.
Replace it after cleaning and drying.
2. Replace the water tank by first inserting it at the bottom.
Then press the top firmly until the water tank clicks into
place.
Steam Nozzle
Clean the steam pipe and the screwed-on steam nozzle im-
mediately after each preparation of milk foam. Milk residues
that have dried up make cleaning more difficult.
1. Unscrew the steam nozzle. Let it soak in the warm rinse
water for a while. This helps to loosen the milk residues.
Problem
The appliance has no
function.
20
PC-ES1265_IM
Troubleshooting
Possible Cause
The appliance has no power supply.
The appliance is defective.
2. Wipe the steam pipe on the appliance with a damp cloth.
- To loosen dried-on residues, fill a vessel with hot
water. Place it under the steam pipe so that it is
immersed in it.
3. Screw the steam nozzle back onto the steam pipe after
cleaning. Place a heat-resistant empty container under
the steam nozzle. Operate the appliance as described
in "Cappuccino Preparation" points 4 and 5. After this
steam cleaning, the steam nozzle is ready for use again.
De-scaling
Limescale deposits endanger the function of the appliance.
Therefore, the appliance must be descaled regularly. The
intervals between descaling depend on the hardness of the
water and the frequency of use.
Descale with a commercially available descaling agent, as
recommended for coffee machines.
1. Follow the dosage instructions on the packaging or
package insert.
2. Operate the appliance without the filter holder, as for
espresso preparation, until the tank is empty. Run the
solution through the brew head.
WARNING:
• Rinse out the water tank and run a full tankful of fresh
water through the brew head to rinse out any descal-
ing agent residue.
• Do not use this water for consumption.
Storage
• Clean the appliance as described. Allow the accessories
to dry completely.
• We recommend storing the appliance in its original
packaging if you do not intend to use it for a longer
period of time.
• Always store the appliance out of the reach of children in
a well-ventilated and dry place.
Remedy
Check the power socket with another appliance.
Insert the mains plug correctly.
Check the house fuse.
Contact our service or a specialist.
09.11.23