Maintenance / Cleaning - Kollmorgen AKM2 Serie Manual De Instrucciones

1.2.4.2 Packaging
Cardboard packing with Instapak® foam cushion.
l
You can return the plastic portion to the supplier (see "Disposal").
l
Motor type
AKM2G2
AKM2G3
AKM2G4
AKM2G5
AKM2G6
AKM2G7
1.2.4.3 Storage
Climate category 1K4 according to IEC 60721-3-1, EN61800-2
l
Storage temperature: - 25...+55°C, max. variation 20K/hr.
l
Humidity: rel. humidity 5% - 95%, no condensation
l
Store only in the manufacturer's original recyclable packaging
l
Max. stacking height: see table in chapter "Packaging"
l
Storage time: unlimited
l

1.2.4.4 Maintenance / Cleaning

Maintenance and cleaning only by qualified personnel
l
The ball bearings should be replaced after 20,000 hours of operation under rated conditions (by
l
the manufacturer).
Check the motor for bearing noise every 2500 operating hours, respectively each year. If any
l
noises are heard, stop the operation of the motor, the bearings must be replaced (by the
manufacturer).
Opening the motor invalidates the warranty.
l
If the housing is dirty, clean housing with Isopropanol or similar, do not immerse or spray
l
1.2.4.5 Repair / Disposal
Repair of the motor must be done by the manufacturer. Opening the motor invalidates the warranty. In
accordance to the WEEE-2012/19/EG-Guidelines we take old devices and accessories back for
professional disposal, if the transport costs are taken over by the sender. Send the motor to:
Kollmorgen s.r.o.
Attn.: Repair Department
Evropska 864
664 42 Modrice / Czech Republic
Email: brno_customer_repairs@kollmorgen.com
Phone: +420 533 314 455
Packing
Cardboard
Cardboard
Cardboard
Cardboard
Cardboard
Cardboard
Kollmorgen | kdn.kollmorgen.com | August 2020
AKM2G Instructions | 1 English
Max. stacking height
10
6
6
5
1
1
9