Operating Instructions SATA Automatic Gun
EN
Table of contents
[Original language: Ger-
man]
1.
2.
3.
4.
5.
6.
7.
8.
Assembly ............................. 101
9.
parts .....................................111
1.
General information
1.1. Introduction
These operating instructions con-
tain important information for oper-
ating the automatic gun. They also
describe assembly, operation, care,
maintenance, cleaning, warnings
and error messages together with
troubleshooting.
Read first!
Read these operating instructions
through completely and thorough-
ly before assembling and using
the automatic gun. Comply with
the safety instructions and dan-
ger warnings!
Always make sure that these op-
erating instructions are kept with
98
the automatic gun or keep them
easily accessible for everyone at
any time!
1.2. Target group
These operating instructions are intend-
ed for trained staff to use in automatic
coating tasks in painting companies.
1.3. Warning notifications
in this
operating manual
Explosion risk!
This warning indicates a high-risk
hazard resulting directly in death
or severe injuries if not avoided.
→ This arrow draws your attention
to corresponding precautions for
averting the hazard.
Warning!
This warning indicates a medi-
um-risk hazard resulting possibly
in death or severe injuries if not
avoided.
→ This arrow draws your attention
to corresponding precautions for
averting the hazard.
Attention!
This notification indicates a low
risk that could lead to light or se-
vere injury or material damages if
it is not avoided.
→ This arrow indicates the corre-
sponding precautionary measure
to avoid the hazard.