Krömker UltraNeb Instrucciones De Uso página 39

Device description
Mist volume push-button
The push-button is used to regulate the amount of
mist produced per time in the nebuliser chamber.
Increase mist volume
☞ Press the button (+) [1].
− One further yellow LED [2] lights up
respectively.
Reduce mist volume
☞ Press the button (-) [1].
− One yellow LED [2] goes out.
Air volume push-button
Increase air volume
☞ Press the button (+) [1].
− One further yellow LED [2] lights up
respectively.
Reduce air volume
☞ Press the button (-) [1].
− One yellow LED [2] goes out.
96200-114 – 10 – 15.07.2020
Setting the timer:
☞ Pressing the button (+) or (-) sets the desired time
on the timer, see [2].
Time can be set up to 60 min.
− When the timer is active, the yellow control lamp
lights up and shows the set time.
− Once the set time has elapsed, the device
switches off automatically:
− The red lamp [3, see information regarding
standby push-button] lights up and an acoustic
warning tone sounds. After approx. 2 minutes,
the warning tone ceases.
− Switching on again can only take place after
switching off with the standby push-button
NOTE:
When using sterile water capsules without a run-
on system, do not exceed a max. setting time of
15 minutes.
39