Installing The Wall-Mounted Model Accessory Kit (Optional Accessory); Installing The Carriage Accessory Kit (Optional Accessory) - Krömker UltraNeb Instrucciones De Uso

6.5.2 Installing the wall-mounted model
accessory kit (optional accessory)
24 25
22 Stainless steel stand tube 25 x 600 mm
23 Articulated arm with adjusting ring
24 Bottle holder with adjusting ring
25 Retainer with adjusting ring
26 Holding claw for device rail
☞ Attach the holder and stand tube (600 mm long)
to a device rail (25x10 mm) on the wall.
☞ Fit the USV 2010 with the rear retainer on the
stand tube and fasten it with the locking screw.
☞ Slide down retainer (to secure the cover of the
nebuliser chamber) and articulated arm onto the
stand tube and adjust.
44
22
23
26
6.5.3 Installing the carriage accessory kit
(optional accessory)
29
27
31
27 Stainless steel stand tube
28 Articulated arm with adjusting ring
29 Bottle holder with adjusting ring
30 Retainer with adjusting ring
31 3-foot carriage
☞ Push the locking ring (A) onto the stand tube and
screw it tight.
☞ Fit the USV 2010 with the rear retainer on the
stand tube of the carriage and fasten it with the
locking screw.
☞ Slide down retainer (to secure the cover of the
nebuliser chamber), articulated arm, bottle holder
(for commercially available top-up systems) onto
the stand tube and adjust.
Commissioning
28
30
96200-114 – 10 – 15.07.2020