Grillo G110 Manual De Instrucciones página 14

ROTARY TILLER – Check the oil level every 100 hours by removing the plug; the oil must almost
fill the rotary tiller box. If necessary add the same oil as for the gearbox (fig. 4, no. 3).
HELPFUL HINTS FOR PROPER USE
1) Important! Always use the clutch for forward and reverse travel.
2) Never leave the out in the rain.
3) Keep the reversing mechanism in the handlebar support clean and well oiled.
4) Never force the gearbox if the gear does not engage; give a succession of little touches on the
clutch.
5) Never strain the engine: if smoke comes out of the exhaust, the engine is toiling and must be
slowed down.
6) Even impossible ground can be tilled, but the machine must be well run-in first.
7) Check the tyre pressure often.
8) When fitting the implements (e.g. rotary tiller) take care not to damage the centring device (see
chapter on «Implements»).
END OF SEASON MAINTENANCE
Clean the machine carefully. Change the engine, gearbox and tiller gearbox oil. Clean the air filter.
Sharpen and grease the blades, replacing them if worn.
PROCEDURE
check the level
Engine oil
Air filter
Spark plug
Check the level
Gearbox oil
Check that the engine intake grid is
clean
Cutter bar
Check that tines are well-sharpened
and well-fixed
Lubricate with grease
Check clutch clearance (free play)
● recommended procedure
‫ ٭‬procedure to be carried out if necessary
Translation of the Original Instructions
MAINTENANCE SUMMARY TABLE
EVERY 8
HOURS
change
check
replace
check/adjust
replace
replace
Check blade
attachment
grease
AFTER
20
HOURS
●
●
●
●
●
●
●
●
●
●
12
EVERY EVERY
50 100
HOURS HOURS
●
‫٭‬
●
●
●
●
●
ONCE A
YEAR OR
EVERY
200
HOURS
●
●