Rear Child Seat For Bicycle - Carrier Mounting System; Technical Features; Table Of Contents Of Product; Assembly Instructions - Bobike GO CARRIERS Instrucciones De Uso

CARRIER MOUNTING SYSTEM

REAR CHILD SEAT FOR BICYCLE - CARRIER MOUNTING SYSTEM

For child safety and for your peace of mind, Bobike has developed the perfect child
carrying solution that's suitable for a wide range of adult bicycles.
Our ergonomic child seats are all built with safety and comfort as the primary goals.
In this manual, you will find the information to attach the baby seat to the carrier.
Carefully read the manual for a safe and correct installation of the child bicycle
seat.

TECHNICAL FEATURES

• This child bicycle seat must not be mounted to bicycles fitted with rear shock
absorbers.
• This child bicycle seat must not be mounted to a racing bicycle with drop handlebar.
• This child bicycle seat must not be mounted to Motorized Vehicles such as Mopeds
and Scooters.
• The child bicycle seat must be assembled on a carrier with a load capacity of 25kg,
according to the ISO 11243 standard.
• The maximum weight applied to the carrier cannot exceed 25kg.
• For safety reasons this seat shall only be fitted to luggage carriers in accordance with
ISO 11243 - 120 to 175 mm. Note: This seat also fits wider carriers – 185 mm.
• The child bicycle seat must be assembled on bicycles with wheels with diameters of
26" and 28".
• This child bicycle seat is only suitable for carrying children with a maximum weight of
22 Kg (and children with recommended ages ranging from 9 months to 5 years of age -
with the weight as the decisive variable).
• The total weight of the cyclist and the child transported must not exceed the
maximum permitted load permitted for the bicycle. Information on the maximum
load can be found in the operating instructions of the bicycle. You can also contact the
manufacturer for this question.
• The seat may only be mounted on a bicycle suitable for the attachment of such
additional loads.
• The position of the child bicycle seat must be adjusted so that the bicycle rider does
not touch the child bicycle seat with the feet when in motion.
• It's very important to adjust correctly the seat and its component parts for optimum
comfort and safety of the child. It's also important that the seat does not slope forward,
so that the child does not tend to slide out of it. It's also important that the backrest
slope backward slightly.
• Check if all parts of the bicycle function correctly with the child bicycle seat mounted.
• Check the instructions of the bicycle, and If you have any doubts on fitting the
child bicycle seat to your bicycle, please contact your bicycle supplier for further
information.

TABLE OF CONTENTS OF PRODUCT

A. Main seat | B. Safety belt | B1. Safety lock | B2. Belt adjuster | B3. Central belt adjuster
| B4. Safety buckle releases | B5. Safety buckle socket | B6. Hole for belt adjustment | C.
Safety belt for bicycle frame | D. Footrest strap| E. Footrest | E1. Footrest safety lever | E2.
Footrest peg | F. Centre of gravity | G. Mounting plate to luggage carrier | G1. Hand knob
| G2. Safety ring | G3. Jaw | H. Cushion | I. Batch serial number

ASSEMBLY INSTRUCTIONS

1. Unscrew the hand knob (G1) and simultaneously lift the security ring (G2). Open the
jaw (G3) to an aperture wider than the luggage carrier.
2. Place the seat on the luggage carrier and then fasten the hand knob (G1) so that the
seat remains slightly attached to the luggage carrier. Check if the jaw (G3) is properly
fastened to the luggage carrier.
3. Fasten the hand knob (G1) so that the seat is well attached to the luggage carrier. As
soon as the hand knob is well tightened, make sure the security lever is properly held
as shown in the picture.
4. The child seat has a centre of gravity (F) (inscribed on the child seat) that must be
positioned in front of the rear wheel axle. If it is positioned behind the axle, the distance
4
EN.