John Bean B 2000P Manual Do Operador página 234

234
Setting Parameters
Resolution of the unbalance amount readings
Selecting the resolution of unbalance readings
in 1 or 5 g, or 0.05 or 0.25 oz increments.
Normal* = 5 g (0.25 oz) increments
Fine = 1 g (0.05 oz) increments
The selected mode of operation can be
transferred to the permanent memory.
Suppression of minor unbalance amount
readings
Off = Suppression off
On * = Suppression on
The selected mode of operation can be
transferred to the permanent memory.
Setting threshold value for unbalance
suppression in g
Selecting the limit (threshold) value for
suppression of minor unbalance readings
in grammes, or ounces. The unit (gms or
oz) depends on the settings made under
"Measurement limit of the unbalance amount
readings".
Grammes:
Range 3.50 to 20.0 g
Factory–adjusted to 3.5 g
Ounces:
Range 0.25 to 2.00 oz
Factory–adjusted to 0.25 oz
The selected mode of operation can be
transferred to the permanent memory.
Measurement limit of the unbalance amount
readings
Selecting unbalance readings in grammes or
ounces, active when the machine is switched on.
Gramm * = Readings in grammes
Ounze = Readings in ounces
The selected mode of operation can be
transferred to the permanent memory.
Number of turns
5 to 25 revolutions possible.
Factory–adjusted to 10.*
The selected mode of operation can be
transferred to the permanent memory.
Note
Reducing the number of measurement revolutions
will reduce the accuracy of measurement.
* = Factory adjusted mode
.. ..........
_