Publicidad
Idiomas disponibles
Idiomas disponibles
•
Power supply main switch disconnected.
•
Insuffi cient voltage or incorrect electric connection of the ap-
pliance.
•
Defective energy regulator.
•
Element defective or not properly connected (burnt internal
heating element).
Heating cannot be adjusted
Possible causes:
•
Temperature thermostat defective.
17.2
SOLID TOP RANGE HOB
The hotplate does not heat.
Possible causes:
•
Check the fuses.
•
Power supply main switch disconnected.
•
Insuffi cient voltage or incorrect electric connection of the ap-
pliance.
•
Temperature thermostat defective.
•
Element defective or not properly connected (burnt internal
heating element).
Heating cannot be adjusted
Possible causes:
•
Temperature thermostat defective.
17.3
ELECTRIC OVEN
The appliance does not heat.
Possible causes:
•
Temperature thermostat defective.
•
Heating elements defective.
•
Safety thermostat tripped.
Heating cannot be adjusted
Possible causes:
•
Temperature thermostat defective.
18 REPLACING COMPONENTS
REMINDERS FOR REPLACING COMPONENTS.
•
Disconnect the appliance electric supply, if present, before
carrying out any operation.
•
After replacing a gas system component, check for gas leaks
at connection points.
•
After replacing an electrical system component, check it is
correctly wired.
•
When replacing the radiant hotplates, handle and re-assem-
ble parts with the utmost care.
18.1
GLASS CERAMIC HOB
Replacing the radiant hotplates
•
Remove the control panel.
•
Remove the tray by tilting it downwards and pulling it out.
•
Replace the faulty component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the thermostat
•
Remove the control panel.
•
Remove the tray by tilting it downwards and pulling it out.
•
Remove the bulb from its seat and replace the faulty part.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
Glass ceramic hob
•
In the event the glass ceramic hob is broken, contact our
company to have it replaced.
18.2
SOLID TOP RANGE HOB
Replacing the radiant hotplates
•
Remove the control panel.
•
Remove the tray by tilting it downwards and pulling it out.
•
Replace the faulty component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the thermostat
•
Remove the control panel.
•
Remove the tray by tilting it downwards and pulling it out.
•
Remove the bulb from its seat and replace the faulty part.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the fan and thermal fuse
•
Remove the control panel.
•
Remove the fan lid.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
18.3
ELECTRIC OVEN
Replacing the knob and indicator light.
•
Remove the control panel.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the working thermostat and safety thermostat.
•
Remove the control panel.
•
Remove the bulb from its seat on the side of the oven.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the heating element
•
Remove the oven fl oor (only for lower heating elements).
•
Undo the screw securing the element to the oven and pull the
element out by approx. 10 cm.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, proceed in reverse or-
der.
19 CLEANING THE INTERIOR
•
Check the condition of the inside of the appliance.
•
Remove any built-up dirt.
•
Check and clean the fumes exhaust system.
20 MAIN COMPONENTS
20.1
SOLID TOP RANGE HOB
•
Indicator light
•
Fan
•
Cooking zone heating element
20.2
GLASS CERAMIC HOB
•
Glass ceramic hob
27
Publicidad
