Electrical Components Location - SWM RS 650 R 2016 Manual De Uso Y Mantenimento

ELECTRICAL COMPONENTS LOCATION

The ignition system includes the following elements:
- Generator (1), on the inner side of L.H. crankcase
cover;
- Electronic ignition coil (2) under the fuel tank;
- Electronic control unit (3) under the saddle;
- Voltage regulator (4) on the R.H. side of the rear
chassis;
- Spark plug (5) on the R.H. side of the cylinder head;
- 12V-700W Starter motor (6) behind the cylinder;
- Solenoid starter (8) located on the fuse holder
plate, under the saddle;
- M.A.Q. Sensor (air temperature, pressure, throttle
position) (10) on the throttle body.
The electrical system includes the following ele-
ments:
- 12V-14Ah Battery (7) under the saddle;
- Turning indicators flasher (17) located on the utili-
ties holder plate, under the saddle;
- Relays located on the utilities holder plate, under
1
the saddle;
- Electric fan relay (14);
- Injector, lambda sensor, fuel pump, coil relay
(14A);
- Horn, turning indicators, stop lights, low and
high beam lights relay (14B);
- Electric fan (16);
- Fuses located on the utilities holder plate, under
the saddle;
- Fuse 23 , FP- 20A (cable sheath marked "P"): fuel
6
7
pump, HT coil, lambda sensor heater, injector;
- Fuses 23A, FM- 15A (cable sheath marked "M"): 12V
depending on ignition switch (system voltage),
parking lights;
- Fuse 23B, FDC- 15A (cable sheath marked "DC"):
electric fan, rear stop light, high beam, low beam,
turning indicators, horn, instrument panel power
supply (instrument functions display).
2
3
4
5
EN - 45