Adjusting The Shock Absorber - SWM RS 650 R 2016 Manual De Uso Y Mantenimento

ADJUSTING THE SHOCK ABSORBER

The rear shock absorber is calibrated for running
with the rider plus a small bag only. It is thus rec-
ommended to adjust the shock absorber setting
(spring preload) when riding with a passenger.
B: rear mudguard top height
C: rear wheel axle height
B
A
WARNING*: The shock absorber adjustment
affects both the stability and the handling of
the motorcycle. After changing the standard
suspension setting, ride with care. We advise
measuring the reference distance "A" before
making any change.
WARNING*: Never disassemble the shock ab-
sorber, which contains compressed gas. Con-
tact your SWM Dealer for any major service.
C
ADJUSTING THE SHOCK ABSORBER SPRING PRELOAD
Proceed as follows:
1. Insert the key in latch (1) then turn clockwise to
release the saddle lock; remove the saddle.
2- Disengage rear left-hand side panel (2) then slide
it toward vehicle front.
3. Clean lock ring nut (3) and adjuster ring nut (4) of
the spring (5).
2
1
EN - 33