Rear Brake Pedal Position Adjustment - SWM RS 650 R 2016 Manual De Uso Y Mantenimento

REAR BRAKE PEDAL POSITION ADJUSTMENT

The position of the rear brake pedal with respect
to the footrest may be adjusted according to the
individual needs.
For adjusting, proceed as follows.
- loosen the screw (1);
- turn the cam (2) in order to raise or lower the
brake pedal (3) within the range available (A);
- the operation done, tighten the screw (1). Once
this adjustment is completed, adjust the free play
of the pedal as follows.
3
REAR BRAKE PEDAL FREE PLAY ADJUSTMENT
The rear brake pedal (3) should have a free play (B)
(0.2 in.) before the brakes begin to bite.
Should this not happen, operate as follows:
- loosen nut (4);
- operate the pump rod (5) to increase or decrease
the free play;
- tighten nut (4) at the end of the operation.
2
5
4
1
A
3
WARNING*:
When the free play requirement is not met,
the brake pads will be subjected to an early
wear that may lead to TOTAL BRAKE INEFFEC-
TIVENESS.
B
EN - 29