Bartscher C4431D Manual De Instrucciones página 65

Replacing the lamp
ATTENTION: Keep exactly the following notes, in order to avoid electric shock or
personal injury:
o Disconnect the power supply of the convection
oven and let it cool down.
o Loosen the screws that fasten the side support
rails. Remove them from the cooking space.
o Unscrew the glass cover A. Pay attention
to the seal C. Replace the lamp B with
one having the same features.
o Screw the glass cover A again. Pay also
attention to the seal C.
o Fasten the support rails on the side walls and make sure that they are securely
screwed.
o If the glass cover is defective or damaged, the convection oven may not be used
until the glass cover has been replaced (contact the customer service).
Replacement and cleaning of the cooling filter (back side of the device)
ATTENTION: Keep precisely the following notes to avoid
electric shock or personal injury:
o interrupt the power supply to the device and let it
cool down;
o loosen the screws that fasten the cooling filter,
and clean or replace the cooling filter;
o once this process is finished, put everything back
together.
- 61 -