Zhermack Hurrimix 2 C305140 Manual Del Usuario página 24

Hurrimix is designed to be used in the electromagnetic environment specified below. The client or Hurrimix
EN 2
environment.
IMMUNITY test
Electrostatic discharge (ESD)
IEC 61000-4-2
Electrical fast transient/bursts
IEC 61000-4-4
Surge
IEC 61000-4-5
Voltage dips, short interruptions and
voltage variations on power supply
input lines
IEC 61000-4-11
Power frequency frequency (50/60
Hz) magnetic fields
IEC 61000-4-8
NOTE: U is the mains AC voltage before applying test levels.
T
Hurrimix 2 is designed to be used in the electromagnetic environment specified below. The client or Hurrimix
environment.
IMMUNITY test
Electrostatic discharge (ESD)
EN 61000-4-2
Electrical fast transient/bursts
EN 61000-4-4
Surge
EN 61000-4-5
Voltage dips, short interruptions and
voltage variations on power supply
input lines
EN 61000-4-11
Power frequency frequency (50/60
Hz) magnetic fields
EN 61000-4-8
NOTE: U is the mains AC voltage before applying test levels.
T
The reference figures are present on pages 3, 4, 5 and 6 of this manual and in the product Quick Guide.
24
hurrimix
2
Manufacturer's declaration and guidance – electromagnetic immunity
IEC 60601 test level
+/-6kV contact
+/-8kV air
+/-2kV for power supply lines
+/-1kV input/output lines
+/-1 kV differential mode
+/-2 kV common mode
<5% UT (>95% dip in U ) for 0,5 cycle
T
40 % U (60% dip in U ) for 5 cycles
T T
70 % U (30% dip in U ) for 25 cycles
T T
<5 % U (>95% in in U ) for 5 s
T T
3A/m
hurrimix
2
Manufacturer's declaration and guidance – electromagnetic immunity
EN 60601 test level
+/-6kV contact
+/-8kV air
+/-2kV for power supply lines
+/-1kV input/output lines
+/-1 kV differential mode
+/-2 kV common mode
<5% UT (>95% dip in U ) for 0,5 cycle
T
40 % U (60% dip in U ) for 5 cycles
T T
70 % U (30% dip in U ) for 25 cycles
T T
<5 % U (>95% in in U ) for 5 s
T T
3A/m
115Vac/60hz
user must ensure that it is used in such an
2
Compliance level Electromagnetic Environment - Guidance
Floor should be wood, concrete or ceramic tile. If
The equipment does
floors are covered with synthetic material, the relative
not change its status.
humidity should be at least 30%.
The equipment does Mains power quality should be that of a typical
not change its status. commercial and/or hospital environment.
The equipment does Mains power quality should be that of a typical
not change its status. commercial and/or hospital environment.
Mains power quality should be that of a typical
commercial and/or hospital environment If the
The equipment does
Hurrimix user requires continued operation, it is
2
not change its status.
recommended that the product be powered from a
UPS.
Power frequency magnetic fields should be at
The equipment does
levels characteristic of a typical location in a typical
not change its status.
commercial or hospital environment.
230Vac/50hz
2 user must ensure that it is used in such an
Compliance level Electromagnetic Environment - Guidance
Floor should be wood, concrete or ceramic tile. If
The equipment does
floors are covered with synthetic material, the relative
not change its status.
humidity should be at least 30%.
The equipment does Mains power quality should be that of a typical
not change its status. commercial and/or hospital environment.
The equipment does Mains power quality should be that of a typical
not change its status. commercial and/or hospital environment.
Mains power quality should be that of a typical
commercial and/or hospital environment If the
The equipment does
Hurrimix user requires continued operation, it is
2
not change its status.
recommended that the product be powered from a
UPS.
Power frequency magnetic fields should be at
The equipment does
levels characteristic of a typical location in a typical
not change its status.
commercial or hospital environment.
hurrimix 2