Hupfer Korbstapler KO/50-50 Manual De Instrucciones página 61

Transport, Assembly, Putting into Operation and Decommissioning
Assembly (Built-in appliances only)
Step 2: Installation
NOTE
EBSH/50-50
Figure 9

Adjust the height-adjustable screw feet so that the appliance can be positioned under the worktop.

Position the appliance exactly under the cut-out in the counter.

Fasten the screw feet and the appliance in the worktop cut-out using 4 angled guides.
4330007_A0
Presetting the operating temperature
In contrast to the mobile appliances with the switch and controller arranged
next to each other, the switch of the built-in appliance can be placed any-
where on the front side.
Under these circumstances, the controller is no longer accessible for operat-
ing after the installation. Ensure that the desired temperature is set on the
thermostat before the installation.
Assembly instructions EBSH/50-50
KO/50-50 | KO/65-53 | KO/50-50K | KO/65-53K | KOUH/50-50 | KOUH/65-53 | EBS/50-50 | EBS-T/50-50 | EBSH/50-50 | EBSH-T/50-50
Chapter 4
Page 23
Basket Dispenser