Troubleshooting; Safety Precautions; Faults - Causes And Remedies - Beem Espresso Perfect Crema Plus Manual De Instrucciones

Troubleshooting

Troubleshooting

Safety precautions

EN

Faults - causes and remedies

Fault
The operating indicator
light does not come on
when the appliance is
switched on.
The automatic circuit
breaker in the fuse box
trips.
Despite pumping noises,
no water comes out of the
appliance
66
DANGER
Electric shock hazard!
Pull the mains plug out of the plug socket before starting
►
troubleshooting.
WARNING
Danger caused by unqualified repairs!
Unqualified repairs can pose considerable dangers for the user
and serious damage to the appliance.
Repairs to electrical appliances may only be carried out by
►
the works after-sales service or by specialists trained by the
manufacturer.
Possible cause
Mains plug not plugged in
No mains power.
The signal lamp is defec-
tive.
Too many appliances con-
nected to the same power
circuit.
Appliance defective.
No water in the tank.
Water tank incorrectly
installed in the housing
Valve on tank clogged
Remedy
Plug the mains plug
in.
Check the fuse /
socket.
Contact After-Sales
Service.
Reduce the number
of appliances on the
power circuit.
Contact After-Sales
Service.
Fill the tank with
water
Install the tank
correctly
Clean the valve or
have replaced by
After-Sales Service
BEEM - Elements of Lifestyle