Retention System - SCHUBERTH C3 Manual De Usuario

f. The helmeT
2. The Bowden cable mechanism will
then release both locks and you
can pivot the chin section up to its
uppermost locking position.
Warning:
The C3 's chin section mechanism is equipped with a safety
®
feature which prevents the chin section from opening of its own
accord in the event of a fall, so when opening it you should also
grip the chin section with one hand.
Closing the chin section
1. To close the chin section, pivot it
down with one hand until both locks
audibly engage.
Warning:
Each time you close the chin flap, check that the locks have
engaged properly by pressing the chin section upwards.
26
Tip:
When using the additional adjustable wind deflector, locking the
chin section is easier if you grip the chin pad underneath with a
finger of your other hand to help you ease the chin section over
your chin.
Warning:
The chin section and the faceshield are integral and important
safety features of the helmet, and maximum protection is
achieved only when both of these features are locked in place.
Therefore, never ride with the chin section raised or unlocked, or
with the faceshield opened.

8. RETENTION SYSTEM

The retention system of the C3
®
additionally secured with neck bands at the back of the helmet shell
(the anti-roll-off system, see section F.13.).
Chinstrap with Micro-Lock ratchet fastener
The C3 comes with a ratchet fastener.
®
This locking system is easy to use and
enables you to optimally adjust the
chinstrap to your head every
time you put on the helmet.
consists of a chin-strap that is
27