En: English - St. Jude Medical Regent Instrucciones De Uso

EN: English

Regent™ Mechanical Heart Valve Sizer Set
Instructions for Use
Description
The Regent™ Mechanical Heart Valve Sizer Set Model 907 is a kit comprised of multiple sizing tools that facilitate proper
handling and implant size selection of the SJM Regent™ Mechanical Heart Valve. The Model 907 sizers are double-ended
tools with a cylindrical valve sizing end, and a SJM Regent™ valve replica end.
The sizer handles can be bent in any direction up to a 90° angle without degradation. When the flexible handles are exposed
to the heat produced during autoclave sterilization, they will revert to their original shape. The corresponding SJM Regent™
Mechanical Heart Valve size is indicated on each sizer. The sizer set is reusable and must be cleaned and sterilized prior to
each use.
Figure 1. Model 907 sizer
Indications
The sizer set is indicated for use with the devices listed in the Description section of this manual.
Contraindications
The sizer set is contraindicated for use with any devices not listed in the Description section of this manual.
Any sterilization method other than steam is contraindicated.
1. SJM Regent™ valve replica end
2. Cylindrical valve sizing end
1