Movement ESTEIRA X 3.0 Manual De Instrucciones página 134

OPERATING INSTRUCTION
FIELD 6 - Digital Time Display151
Monitors the time elapsed during the activity carried out by the user, in either ascending or
descending order, ranging from zero to 99:59 minutes in ascending mode.
FIELD 7 - Digital Speed Display
Monitors the speed reached by the user on the treadmill, with a minimum speed of 0.5 km/h
and a maximum of 18 km/h (3.0 / 3.0I / 3.0 TSI) or 25 km/h (4.6I / 4.6 TSI). Using the SPEED
buttons (+/-) (BUTTONS 11 and 12), commands located on the front shortcut or shortcut
buttons (BUTTON 13). The speed may be changed at any time by the user, depending on the
program.
BUTTON 8 - Program
Button to select the desired program. It is possible for the user to select 1 out of 11 available
programs.
BUTTON 9 - Start Button (Start/Enter)
The user starts the activities and confirms the program to be used when the program is
selected.
BUTTON 10 - Stop Button (Stop activity / Reset data)
Stops the treadmill's activity or resets the previously entered data by merely pressing it once to
stop the treadmill's activity or a second time to zero all of the information.
BUTTON 11 - Increase Speed Button
Increases the speed according to the user's needs during the activity. Changes the values in
the given fields of each program, when one is selected.
BUTTON 12 - Decrease Speed Button
Decreases the speed according to the user's needs during the activity. Changes the values in
the given fields of each program, when one is selected.
BUTTON 13 - Speed Shortcuts
Pre-programmed buttons on the electronics module for easy access speeds (5km/h, 8km/h,
11km/h and 14km/h).
Pre-programmable keys on the front console for easy access speeds (3km/h, 6km/h, 12km/h
and 15km/h).
BUTTON 14 - SAC (Shock Absorber Control) button (NOT AVAILABLE ON SOME MODELS)
The SAC (Shock Absorber Control) control button allows the user to choose the type of shock
absorption on the floor between the hard, medium or soft options. As such, the shock
absorption will be automatically modified according to the type of floor selected. The weight
of the user must be entered for better performance of the shock absorption.
BUTTON 15 - Incline Shortcut (NOT AVAILABLE ON SOME MODELS)
Pre-programmed keys for easy access Incline (3%, 6%, 9% and 12%).
BUTTON 16 - Increase Incline Button (NOT AVAILABLE ON SOME MODELS)
Increases the incline according to user needs during the activity. During Program selection,
select a program on the PROGRAMS screen or floor type on the SHOCK ABSORBER CONTROL
screen.
38