Movement ESTEIRA X 3.0 Manual De Instrucciones página 182

MAINTENANCE
BELT LUBRICATION
Certain precautions are required for proper operation of the Movement treadmill.
Slipping of the belt on the deck requires the material to be properly lubricated.
To maintain the warranty criteria, Movement uses a self-lubricating material to ensure longer
useful life of the material and deck assembly of your equipment.
Upon the slightest problem with the belt material, contact the Manufacturer or an Authorized Point.
DANGER!
Do not use any type of lubricant on the conveyor belt. The use of lubricant will
damage the equipment, with consequent loss of warranty, in addition to the risk of
serious or fatal damage to the user.
INVERTER ERROR TABLE
Before removing the front cover to view the inverter, be sure to
turn off the treadmill. The inverter has codes that can help identify
a problem. Follow the table below with the inverter codes.
(A) ALARM / FAULT (F)
A046
High motor load
A050
High temperature in the
power module
A084
Self-diagnosis alarm
A190
Incline Circuit Fault
F021
DC Bus undervoltage
Motor overload
High temperature measured by the temperature sensor
(NTC) of the power module.
Relating to the inverter hardware automatic identification
algorithm.
Fault in the circuit responsible for incline motor control.
Fault: Undervoltage in the intermediate circuit.
86
DESCRIPTION