Configuration - Movement ESTEIRA X 3.0 Manual De Instrucciones

OPERATING INSTRUCTION

CONFIGURATION:

This control panel has the following parameters, with items from 1 to 5 able to be configured.
1°) TREADMILL MODEL
2°) LANGUAGE
3°) UNIT
4°) STANDARD WEIGHT
5°) MAINTENANCE ALERT
6°) SPEED SENSOR
7°) MAXIMUM SPEED
8°) MINIMUM SPEED
9°) INCLINE VARIATION
10°) TOTAL TIME IN HOURS
11°) AVERAGE SPEED
12°) DISTANCE TRAVELED IN KM
13°) USN OF THE TREADMILL
14°) USN OF THE PANEL
15°) SN OF THE INVERTER
16°) SOFTWARE VERSION
PROCEDURES:
Press the STOP button (BUTTON 10) together with the START button (BUTTON 9) for seconds
until the configuration screen appears on the display. Using the INCLINE buttons (
(BUTTONS 16 and 17) you can select items 1 to 5, or for modules that do not have an incline,
the SPEED button (-) (BUTTON 12) will select the option and the SPEED buttons (+/-)
(BUTTONS 11 and 12) will change the value of the selected item.
1º) TREADMILL MODEL:
MODEL and press SPEED (+/-) (BUTTONS 11 and 12) to adjust the Treadmill Model where the
Panel is installed, pressing START (BUTTON 9) to confirm. The specifications of each treadmill
model are described in the following table:
MODEL TREADMILL
RT-150-USART RT150 SAC
RT-150-FREQ
RT-250-USART
X3.0-USART
X WITH INCLINE
RT-350-USART
X4.6-USART
X WITHOUT
X3.0-FREQ
NOTE: Do not select a different model of the treadmill than that purchased so that no
malfunction occurs.
Use the INCLINE buttons
ELECTRONIC PANEL MODELS
MINIMUM
SPEED (Km/h)
1.2
RT150 1.2
RT250 1.2
0.5
RT350 1.2
4.6 0.5
0.5
INCLINE
( / ) (BUTTONS 16 and 17) to select the
▲ ▼
MAXIMUM
INCLINE
SPEED (Km/h)
18.0
18.0
18.0
18.0
25.0
25.0
18.0
44
INCLINE
VARIATION
NO 1.0
1.0
NO
YES 1.0
YES 0.5
YES 1.0
YES 0.5
0.0
NO
/ )
▲ ▼
SAC
(%)
YES
NO
YES
YES
YES
YES
NO