Integra JARIT DETACH Manual Del Usuario página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 16
DIRECTIONS FOR RE-ATTACHING
Step 1: Be sure the blades of the scissors insert are in the CLOSED position.
Result: The instrument will not re-attach with the blades open.
Step 2: Holding the scissors insert (jaw closed) in one hand and the handle
(handle open) in the other hand, place the insert into the shaft and align
the small knob with the arrow on the shaft. While holding the distal tip (in
closed position) and the handle in the full open position, apply light pressure
in the direction of the handle and press the button on the top of the handle.
Result: The scissors insert will fall into place when it is properly aligned and
the button pushed.
Step 3: Release the button and close the handle fully. (A slight clicking
sound will be heard.) Result: The scissors insert has been re-engaged and
the instrument is ready for use.
4

Publicidad

Tabla de contenido
loading

Tabla de contenido