Ingersoll Rand G330 Guía De Usuario Y Mantenimiento Manual página 10

- Disconnect the battery and pneumatic starter (if there is one) before carrying out any
repair, to prevent the engine from starting accidentally. Fit a panel over the controls to
prevent any attempt at starting.
- Do not modify the engine.
- Only use the correct techniques for turning the crankshaft to rotate the crankshaft
manually. Do not try to rotate the crankshaft by pulling or exerting force on the lever
on the fan. This method can cause serious physical or material harm or damage the fan
blade (s), leading to premature breakdown of the fan.
- Always use tools in good condition. Check that you have understood how to use them
before starting a procedure.
- Only fit original spare parts.
- Use tools that correspond to the work being carried out.
- Clean all traces of oil or coolant with a clean cloth.
- Never use petrol or other flammable substances to clean parts. Use only approved
cleaning solvents.
- Do not use a high-pressure cleaner for cleaning the engine and fittings. The radiator,
hoses, electrical components etc. could be damaged.
- Avoid accidental contact with parts that reach high temperatures (exhaust manifold,
exhaust)
- Engage the parking brake when the generating set on its trailer is installed on the
operating site.
- When setting on a slope; check that no-one is behind the trailer.
- Protective eyewear must be worn when handing during maintenance operations.
Operators should remove watches, chains, etc.
- 8 -