Ingersoll Rand G330 Guía De Usuario Y Mantenimiento Manual página 53

All the symbols related to the engine parameters are represented in the table below.
Symbol number
(galvanometer)
(generating set battery)
(thermometer with oil drop)
(thermometer with cooling fluid level)
6 - O O ther s s ymbols
! Loss of system voltage (symbol 9)
Loss of the system voltage (or loss of mains) is represented on the screen by a crossed-out transformer.
The micro-cutout time-delay (parameter 103 of Timing menu) is displayed next to this symbol and decrements automatically
from the adjustment setting to 0.
(symbol 3) (%)
(symbol 4) (RPM)
(symbol 5) (Volts)
(symbol 9) : 12''
! Return of system voltage (symbol 10)
Return of the system voltage (or mains voltage) is represented on the screen by a transformer. The mains return time delay (para-
meter 104 of Timing menu) is displayed next to this symbol and decrements automatically from the adjustment setting to 0.
(Amps) 11
(Amps) 12
(Amps) 13
(symbol 10) : 2" 15"
Symbol 3
(fuel pump)
Symbol 4
Symbol 5
Symbol 6
(oil can)
Symbol 7
Symbol 8
Example of screen showing system voltage is no longer available. 12 seconds remain prior to startup
50
of the generating set (micro-cutout time delay).
0
24.2
Example of screen showing system voltage is again available. Two minutes and fifteen seconds remain
645
prior to automatic switchover from the generating set to the system (mains return time delay).
680
653
Note: The two previous symbols can only be displayed provided the type 2 control parameter is at 1
(see user paragraph 2.1.1).
Pictogram
Fuel level in daily tank
Engine oil temperature
Cooling fluid temperature
Description
Engine speed
Battery voltage
Engine oil pressure
23