Ingersoll Rand G330 Guía De Usuario Y Mantenimiento Manual página 52

(Amps) In
! Press the Hz key to display the generating set frequency and running hours and minutes.
(Symbol 1) (Hz)
50.2
(Symbol 2)
(Symbol 2)
Symbol number
Symbol 1
(sinewave)
Symbol 2
(hourglass)
5 - D D isplay o o f m m echanical v v alues
By pressing the Engine button successively, the following is displayed: oil pressure, water temperature, oil temperature, battery voltage, engine
speed and fuel remaining in daily tank.
(symbol 3) (%)
(symbol 4) (RPM)
1500
(symbol 5) (Volts)
24.2
(symbol 6) (Bars)
(symbol 7) (°C)
(symbol 8) (°C)
A third screen can be accessed using the Engine button with Anglo-Saxon notations for the oil pressure (PSI), the water temperature (°F) and
the oil temperature (°F).
Note: if the oil temperature is not selected (Sensors menu) or if the analog pack has not been selected, the symbol(s) will not appear on the
screen.
22
The Ampere is the unit if measurement of the currents output by the alternator (screen display: Amps).
22
Hz is the abbreviation for Hertz. Symbols 1 and 2 are represented in the table below.
643
45
The notations: %, RPM and Volts are preserved. For more information on the meaning of the notations,
50
refer to the user paragraph 5.
The notations: Bars and C° are preserved. For more information on the meaning of the notations, refer
6
to the user paragraph 5.
90
75
Pictogram
frequency of voltage output
number of generating set
running hours and minutes
Description
by alternator