Units; Temporary Measuring Unit; Units Accessibility - RADWAG R Serie Manual Del Usuario

•
Home screen of the software is displayed again automatically.
•
When logged, add users and set the permissions levels (for the procedure of assigning
permissions levels read section 9.1).
On future Logging In, select a user from the list and enter the password, the software initiates
operation with permissions level set for the selected user.
If any user is logged in, a pictogram
Log out operation – procedure:
•
Select <NONE> position out of the list of available users
•
Home screen of the software is displayed again, and the display shows no logged-in user (no
logged-in user, no pictogram

5.5. UNITS

UNITS parameter group enables the user to change availability of mass units (the change can be
performed in-course of balance operation), and to define two custom units, thus positively effecting
comfort and speed of operation. It is possible to change unit to other than unit [g] during weighing
process or during operation of other modes. Working modes Parts Counting and Percent Weighing
are exceptions.

5.6. TEMPORARY MEASURING UNIT

Function enables selecting a measuring unit which is to be indicated next to mass reading during the
operation. The set measuring unit will be in use from the moment of its activation until its change or
switching the balance off and on.
Each pressing of the
Options:
•
For verified balances, you can select from the following: [g], [mg] or [kg], [ct]
•
For non-verified balances, you can select from the following: [g], [mg], [kg], [ct], [lb], [oz], [ozt],
[dwt], [tlh], [tls], [tlt], [tlc], [mom], [gr], [ti], [N]

5.7. UNITS ACCESSIBILITY

By pressing button
Units with parameter value set to <YES> are available for selection in specified operating modes.
Procedure:
is displayed.
on the display).
button results with change of the measuring unit.
, the user may declare units to be available for selection of temporary unit.
- 20 -