RADWAG R Serie Manual Del Usuario página 92

Set ambient conditions state
Format: EV_n CR LF
Response options:
EV_OK CR LF
EV_E CR LF
EV_I CR LF
n – parameter, decimal value determining ambient conditions state
n → 0 – unstable ambient conditions
1 – stable ambient conditions
CAUTION!
Command changes settings for a current working mode.
An example:
Command:
Response:
<AMBIENT CONDITIONS> parameter is set to value <STABLE> until command EV 0 swaps it to
value <UNSTABLE>.
Set filter
Format: FIS_n CR LF
Response options:
FIS_OK CR LF
FIS_E CR LF
FIS_I CR LF
n – parameter, decimal value determining filter number
n → 1 – very fast
2 – fast
3 – average
4 – slow
5 – very slow
CAUTION!
The numbering is assigned to a particular filter name and it is identical for all balance types.
The command changes settings for a current working mode if, for a particular balance type, filter settings are
assigned to the working mode.
An example:
Command:
Response:
Set Value release
Format: ARS_n CR LF
Response options:
ARS_OK CR LF
ARS_E CR LF
ARS_I CR LF
n – parameter, decimal value determining value release options
n → 1 – fast
2 – fast+reliable
3 – reliable
CAUTION!
The numbering is assigned to a particular value release option and it is identical for all balance types.
The command changes settings for a current working mode if, for a particular balance type, value release
settings are assigned to the working mode
An example:
Command:
Response:
– command carried out
– error in-course of command execution, no parameter or incorrect format
– command understood but not accessible at this moment
EV_1 CR LF
EV_OK CR LF
– command carried out
– error in-course of command execution, no parameter or incorrect format
– command understood but not accessible at this moment
FIS_3 CR LF
FIS_OK CR LF
– command carried out
– error in-course of command execution, no parameter or incorrect format
– command understood but not accessible at this moment
ARS_2 CR LF
ARS_OK CR LF
– set value 'stable' for ambient conditions option
– ambient conditions option set to value 'stable'
– set average filter
– average filter set
– set value release parameter to fast+reliable option
– fast+reliable option set
- 92 -