Ps R2.H Series - RADWAG R Serie Manual Del Usuario

1.4. PS R2.H SERIES

PS R2.H series redefine the level of standard for precision balances. Not only do they share all the
features of R series balances, but can also work in adverse operating conditions (condensed dust,
drops of water falling down at different angles) typical for IP 54.
PS.R2.H balances are offered with round pans of two possible sizes: ø115mm and ø170mm.
Balances with pans of a smaller size feature draft shield as well.
Additional asset of PS R2.H balances are their interfaces build-in a hermetic closed housing which is
separated from the balance. The interfaces include 2×RS 232, USB type A, USB type B, and Wi-Fi
optionally.
Balance housing is made of plastic, whereas its pan of stainless steel.
PS R2.H series metrological parameters are identical like those of standard design balances.
Balance with pan Φ 115 mm
Balance assembly
Balance with pan Φ 170 mm
Upon unpacking the balance remove any
protective elements
balance:
Install:
•
metal weighing pan (2)
draft shield (1), for balances with pan Φ
•
115 mm
•
plug a power supplier connector into the
port of interfaces housing
•
plug the power supplier into the mains
- 8 -
and assembly the