RADWAG R Serie Manual Del Usuario página 91

Send all implemented commands
Format: PC CR LF
Command: PC CR LF
Response: PC_A_"Z,T,S,SI..."
Give balance type
Format: BN CR LF
Response options:
BN_A_"x" CR LF
BN_I CR LF
x – series of types for a particular balance (in between inverted commas), with general balance type
in front
An example:
Command:
Response:
Give max capacity
Format: FS CR LF
Response options:
FS_A_"x" CR LF
FS_I CR LF
x – Max value of reading units (in between inverted commas)
An example:
Command:
Response:
Give program version
Format: RV CR LF
Response options:
RV_A_"x" CR LF
RV_I CR LF
x – program version (in between inverted commas)
An example:
Command:
Response:
Set AUTOZERO function
Format: A_n CR LF
Response options:
A_OK CR LF
A_E CR LF
A_I CR LF
n – parameter, decimal value determining autozero settings
n → 0 – autozero off
1 – autozero on
CAUTION!
Command changes settings for a current working mode.
An example:
Command:
Response:
AUTOZERO function operates until it is turned off by A 0 command.
- command understood, response: balance type
- command understood but not accessible at this moment
BN CR LF
BN_A_"AS"
- command understood, response: Max capacity
- command understood but not accessible at this moment
FS CR LF
FS_A_"220.0000"
- command understood, response: program version
- command understood but not accessible at this moment
RV CR LF
RV_A_" 1.1.1"
– command carried out
– error in-course of command execution, no parameter or incorrect format
– command understood but not accessible at this moment
A_1 CR LF
A_OK CR LF
- send all implemented commands
- command carried out, the terminal displays all
implemented commands.
– return balance type
– balance type: "AS R"
– return Max capacity
– Max capacity: "220 g"
– return program version
– program version: "1.1.1"
– turn autozero function on
– autozero function is on
- 91 -