RADWAG R Serie Manual Del Usuario página 86

Immediately send measurement result in a current measuring unit
Format: SUI CR LF
Response options:
SUI_I CR LF - command understood but not accessible at this moment
MASS FRAME - immediate response: mass value in a current measuring unit
Response format:
1 2 3 4
stability
S U I
marker
An example:
S U I CR LF – command sent from a computer
S U I ? _ - _ _ _ 5 8 . 2 3 7 _ k g _ CR LF
where: _ - space
Switch on continuous transmission in a basic measuring unit
Format: C1 CR LF
Response options:
C1_I CR LF - command understood but not accessible at this moment
C1_A CR LF - command understood and in progress
MASS FRAME - response: mass value in a basic measuring unit
Response format:
1 2 3
S I space
Switch off continuous transmission in a basic measuring unit
Format: C0 CR LF
Response options:
C0_I CR LF - command understood but not accessible at this moment
C0_A CR LF - command understood and carried out
Switch on continuous transmission in a current measuring unit
Format: CU1 CR LF
Response options:
CU1_I CR LF - command understood but not accessible at this moment
CU1_A CR LF - command understood and in progress
MASS FRAME - response: mass value in a current measuring unit
Response format:
1 2 3 4
stability
S U I
marker
Switch off continuous transmission in a current measuring unit
Format: CU0 CR LF
Response options:
CU0_I CR LF - command understood but not accessible at this moment
CU0_A CR LF - command understood and carried out
Set min checkweighing threshold
Format: DH_XXXXX CR LF, where: _ - space, XXXXX – mass format
Response options:
DH_OK CR LF - command carried out
ES CR LF - command not recognised (mass format incorrect)
5
space
4 5
stability
space
marker
5 6
space character
6 7-15
character mass
- command carried out, immediate response: mass value
in a current measuring unit
6 7-15
character mass
7-15
mass
- 86 -
16 17 18
space unit
16 17 18
space unit
16 17 18
space unit
19 20 21
CR LF
19 20 21
CR LF
19 20 21
CR LF