Process Fluid Temperature Display - Thermo Scientific ThermoFlex Manual De Instrucciones

Process Fluid
Temperature
Display
Thermo Scientific
SETPOINT
+24.2 C
Pressure: xxx.x psi
Figure 4-3 Process Fluid Temperature Display
The SETPOINT and MENU portions on the top of the display are used to
view and/or change the controller's settings. They are explained in detail later
in this Section.
The bars on the left of the display indicate the chiller's operating status.
Indicates the chiller is either not running or the
ThermoFlex is at the desired setpoint.
Indicates the chiller is heating up to the setpoint.
Indicates the chiller is cooling down to the setpoint.
The small circle indicates which sensor is controlling the chiller.
When displayed, indicates the ThermoFlex is responding to the
In
chiller's internal temperature sensor.
When displayed, indicates the ThermoFlex is responding to an
Ex
external temperature sensor. See Analog Comm - ACOM in
this Section to enable the external sensor.
The chiller is always in internal or external control. The default setting is
internal.
The temperature displayed is the current process fluid temperature.
The message on the bottom is used to display the chiller's operational status.
The status displays are explained later in this Section.
MENU
In
Section 4
ThermoFlex 4-5