Menu Display - Thermo Scientific ThermoFlex Manual De Instrucciones

Section 4
MENU Displays
The ThermoFlex controller uses menus to view/change the controller's settings.
Note Depressing and holding the enter button for two seconds before starting the chiller allows you to
view and to make changes to the settings.
1. Press the arrows to highlight MENU.
SETPOINT
+24.2 C
Pressure: xxx.x psi
3. Press the up and down arrows to highlight
the desired option.
SETPOINT
SETTINGS
DRAINING
TUNING
CALIBRATION
DIAGNOSTICS
5. There are various ways to navigate through
all the menu options.
SETTINGS
UNITS
SETPOINT
TEMPERATURE
PRESSURE
7. Or, highlight the home icon at the bottom
of the display.
SETTINGS
UNITS
SETPOINT
TEMPERATURE
PRESSURE
4-8 ThermoFlex

MENU
In
MENU
2. The controller brings up the Main Menu Display.
SETPOINT
SETTINGS
DRAINING
TUNING
CALIBRATION
DIAGNOSTICS
Main Menu Display
4. With the desired option highlighted, press enter
to display sub-menus.
SETTINGS
UNITS
SETPOINT
TEMPERATURE
PRESSURE
6. In the example in step 5, pressing the left
arrow, or the esc button, on the controller will
return you to the previous display.
SETPOINT
SETTINGS
DRAINING
TUNING
CALIBRATION
DIAGNOSTICS
8. Then press enter to return to the Main Menu
Display.
SETPOINT
SETTINGS
DRAINING
TUNING
CALIBRATION
DIAGNOSTICS
MENU
MENU
MENU
Thermo Scientific