Diagnostic; Operating Hours - Thermo Scientific ThermoFlex Manual De Instrucciones

Section 6

DIAGNOSTIC

- OPERATING HOURS

OPERATING HOURS displays the chiller (
is also used to select the preventive maintenance schedule (Care Level and optional De-I Period).
1. Use the arrow buttons to highlight
OPERATING HOURS.
DIAGNOSTICS
MESSAGES
OPERATING HOURS
SERVICE
MONITOR VALUES
PASSWORD
3. Highlight the desired item and press enter to
bring up one of the displays shown on the right:
Reset
4. With highlighted, press enter to reset
the filter and cartridge operating hours to zero.
You cannot reset the chiller's operating hours.
5. Use the arrow buttons to highlight
Level
. Press enter and the display will flash.
Use the arrow buttons to display the desired
care level and then press enter again to stop the
flashing and accept the new value.
De-I Period
6. The optional
ing time needed to display the
the arrow buttons to highlight
Press enter and the display will flash. Use the
arrow buttons to display the desired time, from
0 to 9999 hours. Press enter again to stop the
flashing and accept the new value.
6-2 ThermoFlex
Unit
), filter and optional DI cartridge operating hours. The display
Care
is the operat-
DI
message. Use
De-I Period
.
2. Press enter to display:
OPERATING HOURS
Unit
Filters air/bag
Deionization cart.
Unit
Hours
Filters air/bag
Hours
Reset
Care Level
Deionization cart.
Hours
Reset
De-I Period
(Optional Display)
xxxx
xxxx
x
xxxx
xxx
Thermo Scientific