Messages; Firmware Version - Thermo Scientific ThermoFlex Manual De Instrucciones

MESSAGES

displays the ten most recent warnings and faults. The date and time each error occurred is
shown. The alarm value is also displayed. Use the arrow buttons to scroll through the list of messages. Press enter
to show the deletion options, Single or All. Choose Single to delete the selected error or All to delete all errors
in the category. Press enter to show the delete confirmation screen. Finally, press enter again to make the deletion.
1. From the Main Menu display use the arrow
buttons to highlight DIAGNOSTICS.
SETPOINT
SETTINGS
TUNING
CALIBRATION
DIAGNOSTICS

FIRMWARE VERSION

3. Press enter to display:
MESSAGES
WARNINGS
FAULTS
5. If desired, press enter again to display:
Delete alarm msg?
Yes
No
For either message type, if there aren't any
messages the display will indicate:
empty
Thermo Scientific
MENU
2. Press enter and use the arrow buttons to
highlight MESSAGES.
DIAGNOSTICS
MESSAGES
OPERATING HOURS
SERVICE
4. Highlight the desired type message and press
enter again to display:
WARNING
High Fixed Temp
mm/dd/yy
xx.x
Yes
6. If is selected press enter again to display:
Delete
Single
All
Section 7
hh:mm:ss
n of m
ThermoFlex 7-11