Description; Specifications - Thermo Scientific ThermoFlex Manual De Instrucciones

Description

Specifications

Standard Chiller Process
Fluid Temperature/Setpoint Range
High-Temperature Chiller Process
Fluid Temperature/Setpoint Range
Ambient Temperature Range
Temperature Stability
Cooling Capacity at 20°C 60 Hz
Heater Size 208V/230V
Reservoir Volume Gallons
Footprint or Dimensions (H x W x D)
Weight P 2 Pump (empty) lb
Pumping Capacity
P 1/MD 1 - Positive Displacement 60
P 2/MD 2 - Positive Displacement 60
T 0 - Turbine 60 Hz*
T 1 - Turbine 60 Hz*
* Pumping capacity pressure values for turbine pumps are differential pressures between the inlet and the outlet of the chiller.
• Cooling capacity based on P 2 pumps with no backpressure. Heat input from the pump will result in a reduction in cooling capacity. The cooling
capacity reduction will vary based on the pump chosen as well as pump backpressure and flow.
• Specifications obtained at sea level using water as the recirculating fluid, at a 20°C process setpoint, 25°C ambient condition, at nominal
operating voltage. Other fluids, fluid temperatures, ambient temperatures, altitude or operating voltages will affect performance. See Section 3.
• Additional dimensions are at the end of this section, add 1/8" (3 mm) to height for SEMI.
• Add 5 pounds (2 kilograms) for global voltage chillers.
• Thermo Fisher Scientific reserves the right to change specifications without notice.
Thermo Scientific
Section 2
The Thermo Scientific ThermoFlex
provide a continuous supply of fluid at a constant temperature and flow rate.
The chiller consists of an air-cooled or water-cooled refrigeration system, heat
exchanger, recirculating pump, reservoir and a microprocessor controller.
ThermoFlex900
+41°F to +104°F
+ 10°C to +40°C
All Chillers
+ 50°F to +104°F
900 W (3074 BTU)
50 Hz 750 W (2561 BTU)
*To meet this specification, the ThermoFlex2500 air-cooled chillers require the fan to be operating in the
high-speed mode, see Section 3.
Refrigerant
Liters
Inches 27.3 x 14.2 x 24.6
Centimeters 69.2 x 36.0 x 62.4
kg
Hz*
50 Hz*
Hz*
50 Hz*
50 Hz*
50 Hz*
General Information
+5°C to +40°C
Not Available
Not Available
±0.1°C
Not Available 1.0kW/1.2kW or 2.3kW/2.8kW
R134A
1.9
7.2
130.5
59.2
2.1 gpm @ 60 psig (7.9 lpm @ 4.1 bar)
1.7 gpm @ 60 psig (6.4 lpm @ 4.1 bar)
4.0 gpm @ 60 psig (15.1 lpm @ 4.1 bar)
3.3 gpm @ 60 psig (12.5 lpm @ 4.1 bar)
2.0 gpm @ 60 psid (7.6 lpm @ 4.1 bar)
1.3 gpm @ 60 psid (4.9 lpm @ 4.1 bar)
3.5 gpm @ 60 psid (13.3 lpm @ 4.1 bar)
2.5 gpm @ 60 psid (9.5 lpm @ 4.1 bar)
recirculating chillers are designed to
TM
ThermoFlex1400
+5°C to +40°C
+41°F to +104°F
+5°C to +90°C
+41°F to +194°F
+10°C to +40°C
+50°F to +104°F
±0.1°C
1400 W (4781 BTU)
1170 W (3996 BTU)
R134A
1.9
7.2
27.3 x 14.2 x 24.6
69.2 x 36.0 x 62.4
130.5
59.2
ThermoFlex2500
+5°C to +40°C
+41°F to +104°F
+5°C to +90°C
+41°F to +194°F
+10°C to +40°C
+50°F to +104°F
±0.1°C
2500 W (8538 BTU)*
2200 W (7513 BTU)*
2.3kW/2.8kW
R134A
1.9
7.2
29.0 x 17.2 x 26.7
73.6 x 43.6 x 68.0
175.5
79.6
ThermoFlex 2-1